8kVA UPS Prices and Specifications

Edge computing pushes data processing nearest to the device that needs the information to operate, rather than pushing the data back to a centralised datacentre. Edge computing is essentially a de-centralised approach. In terms of power protection to ensure resilience in an entire decentralised eco-system it is important to protect both the servers within the cloud datacentre and each data-processing point along the Edge computing network. Larger three phase UPS systems may be required for datacentres with far smaller uninterruptible power supplies required for small load servers, PCs and Internet of Things (IoT) devices.

Most UPS systems are designed to recharge their batteries to 80% within a 24 hour period. This is achieved through the UPS having an internal charging system. External battery packs may also be fitted with their own individual AC powered battery charger. From 80% the batteries are trickled charged as the typical charging curve is non-linear. The simplest way as a rule of thumb to calculate the recharge time is to take the Ampere-hour (Ah) of the battery set used and divide by the charging current:

Recharge time = Ampere-hour / recharge current

Power protection devices like UPS systems are typically referred to in terms of VA, kVA or even MVA. This measurement refers to the Apparent Power drawn by a load and is calculated as follows:

Apparent Power (VA) = Supply Voltage (V) x Amps (A)

In the formula (V) is the Root Mean Square (RMS) of the supply voltage and the Amps is the current drawn by the load. Ideally it is important to measure the current drawn at start-up and after the start-up process has settled down to the a running load current. To measure the Apparent Power drawn by a three phase load the formula is applied per phase and then the individual VA results are added together to give a final total.