Wall Mount IP65 Box with RS485 Temperature Sensors with 2m Cable

A Wall Mount IP65 Box with an RS485 Temperature Sensor in a stainless-steel rod with a 2m Cable. The sensor can be used independently or with Poseidon2 environment monitors.

Key Features

• Environment: Indoor or outdoor use, wall mount
• Supplied Probe: external Pt100 temperature probe (stainless steel housing, 2m cable)
• External Probe Measured Temperature Range: minus 50 to 200degC
• Operating Temperature: from minus 30 to 70degC
• Interface: RS485, terminals
• Power Supply: from the Poseidon2 (12Vdc) or separate 10-35Vdc

Temperature Probe

The temperature probe is separate from the converter to enable a wider range of temperatures to be measured and make the installation easier in certain applications.

• Measuring Element: Pt100/A, IP67 protection
• Cable Length: 2m shielded silicone
• Rod Length: 50mm
• Probe Connection: 4-wire
• Enclosure Material: 17240 stainless steel
• Converter protection: IP65 (EN 60 529)
• Supply Voltage: 10-35Vdc (protected against polarity reversal)
• Energy Consumption During Measurement: typically 2 mA
• Energy Consumption During RS485 Transmission: typically 60 mA
• Wire Connection: CUU 2.5 mm2 terminals

RS485 BUS

• Communication: ASCII (9600Bd 8N1)
• Address configuration: software configuration or jumpers
• Termination: can be enabled with a DIP switch

Applications

Typical applications include measuring temperature in places that can be flooded with water, or environments with moisture and condensation.