Riello Multi Switch 30A Automatic Transfer Switch

The Riello Multi Switch 30A automatic transfer switch ATS provides a redundant power source to connected loads, from 1 of 2 AC input sources (either mains power supplies or UPS systems). The ATS automatically transfers the load to a secondary source in the event of disruption to the primary feed.

Riello 30A Multi Switch ATS Features

• Separate Input Power Sources: input sources can be 2 mains supplies, 2 UPS (of different sizes) or a combination of both. The 30A model has 4 IEC 10A and 1 IEC 16A sockets, plus a terminal board. The alternative 16A version has 8 IEC 10A and 1 IEC 16A sockets.
• Protection Against Supply And Load Failures: Multi Switch ATS automatically switches the load to the secondary input when there is a supply fault. If the sources are in phase, transfer is instantaneous (less than 8ms) and if not in phase it takes less than 21s. A short circuit or load failure sees it immediately cut off any sockets connected to the load.
• Installation: designed for installation in 19-inch cabinets
• Connectivity: card slot for LAN connection and remote management