The Eaton ePDU G3 Metered Input PDU with a 32A 1phase input, IEC309 power cord, 20xC13, 2xC19 and 2xDIN Schuko outlets. The G3 ePDU has a menu driven pixel display for easy setup, trouble shooting and access to status information. The power distribution unit provides highly accurate power measurements within +/-1% for revenue grade power monitoring and allows effective input power measurement. The monitoring module can be hot-swapped without a server rack power down. Up to 3 sensors per rack PDU can be daisy-chained with each sensor providing 1 environmental probe, 1 humidity probe and 2 dry contacts. Up to eight ePDUs ca be daisy-chained from one IP address.
Eaton ePDU EMIB18 Metered Input PDU Features
- Outlet sockets with dual built-in security mechanism eGrip and P-Lock
- Colour-coded outlet and branch circuits for simple load balancing
- 60°C operating temperature
- Universal rack mounting system (button and clip feet)
- Outlet sockets with dual built-in security mechanism eGrip and P-Lock
- Colour-coded outlet and branch circuits for simple load balancing
- 60°C operating temperature
- Universal rack mounting system (button and clip feet)
- Alternating phase per sections (available on 3Phase 32A PDU)
- Hot-Swap Control module with Advanced LCD + Optional Temp/Humidity sensor
- ±1% IEC Class 1 Billing Grade Accuracy for V, W, A and kWh & Cisco EnergyWise compliant
- Phase Metering, Circuit Breaker Current Metering and Input Metering
- Daisy-Chain up to 8 ePDUs, reduce network infrastructure costs
- Power chain monitoring and real time datacentre via the Eaton Intelligent Power Manager
- Protocols and standards include HTTPS, SSL, Telnet, FTP, SNMP, SMTP, DHCP, LDAP, RADIUS, DHCP 66/67 for mass configuration
Vertical mounting units (0U) include both rear and side button mounting system and Eaton’s patented variable clip feet. Horizontal units (1U/2U) come with rack ear support.
ePDU Accessories
- Environmental Monitoring Probe Gen 2 (EMPDT1H1C2): for live temperature and humidity measurements, set threshold alarm levels and be notified in real time
- Adaptor Fast Ethernet Gigabit (GBCONV): a quick and easy way to upgrade your 10/100 Mb network interface G3 ePDU to Gigabit speed
- ePDU to UPS Cables (CBLOUT32 / CBL2OUT32): to connect an ePDU 32A input to the hardwired output of an Eaton UPS
- Water leak detector (WLD012): detect floods and water leaks
- Door contact sensor (DCS001): to monitor your rack access
